Smooth over the stripes with the squeegee, making sure to work out any bumpy areas. This should easily lift off and will allow you to directly place the stripes onto the wet surface of vehicle. Pull away the release paper on the stripes. Secure one end of the stripes with masking tape to hold it during the application process. If you haven’t taped the stripe on one end, use masking tape to secure the end of the racing stripe to the car. Spray water over the area where you will apply the stripes. Part 4 of 4: Apply the stripesĪfter identifying where you’d like the stripes to go, prepare the surface of the vehicle and apply the stripes. Mark the position of the stripes using masking tape, if needed, and then remove the stripes from your car. You can also use tape to mark the corners of the stripes so that you can remember exactly where to place them. Cut off any extra length of the racing stripe that you don’t need. Step away from the car and make sure the stripe is straight and placed exactly where want it. Step 4: Make sure the stripes are straight. If you’re placing it on the hood or trunk, simply set it where you’d like the stripe to appear.
If necessary, use some masking tape to hold the stripe in place. Place one of the racing stripes on your vehicle. Be sure to keep them at a temperature between 60 - 80 degrees. Remove the racing stripes from their packing and lay them flat on a table. Make sure that you purchase the right kind of racing stripes for your car’s dimensions. However, if you’d prefer to purchase them in person, automotive stores like AutoZone also sell them. You can easily find a large variety of racing stripes online.
Part 3 of 4: Place the stripesīefore fixing the stripes to your car with adhesive, be sure to place them on the car so that you can see what they look like before securing them to your vehicle. Repair any small rust holes in your car so that the surface is smooth. Small scratches can easily be covered with racing stripes. If you place racing stripes over a dent, it may result in an air bubble beneath the stripe. Get a certified mechanic, such as one from YourMechanic, to repair any large dents. Vinyl racing stripes will need to be carefully smoothed over uneven areas. Look for any dents, scratches, rust or other blemishes on the car. Step 5: Repair any uneven areas on the surface. Ideally, the car should be in a room that is between 60-80 degrees.
If you don’t do this, the vinyl stripes may not stick as well to your car, which can result in them coming loose or falling off. Remove any dirt, bugs, wax, cleaning product or any other build up on the surface of the car. This will help you decide where you should place the stripes on your vehicle and determines the parts of your car that need to primed before you apply the stripes. You may notice another vehicle that has racing stripes placed in a way that appeals to you or you may notice racing stripes that do not look good on a certain part of another car. Look at other cars that already have racing stripes placed on them. Look at your car and imagine where you’d like the racing stripes placed. Before you apply the racing stripes, decide the position and location of the stripes on your car. Nowadays, you’ll see stripes applied in wide range of patterns and styles. Traditionally, racing stripes were applied across the length of the car from the hood to the rear. Part 1 of 4: Choose the location of the racing stripes
#Racing stripes for cars how to
Use the following steps to learn how to put new racing stripes on an older car. New decal racing stripes can be carefully applied with application kits and typically only take a few hours to apply. Fresh paint is a great way to keep up the appearance of older vehicles, and a great way to show individual style.Īdding new racing stripes is an easy way to change the appearance of an older car and make it stand out. Older cars or classic cars have a lot of appeal because they represent bygone eras.
0 kommentar(er)
